Introducing the GEN4™ Tungsten Grinder with 4 Integrated Tungsten Grind Angles (22.5°, 20°, 15° and 10°) , 4 Guide Offsets, 4 Tungsten Guides ( .040, 1/16, 3/32 & 1/8) and a machined in Tungsten Cut-Off Port, the all New GEN4™ offers more features then any Tungsten Grinder on the market!
We took a hard look at Multi-Offset, Multi-Angle Units, past and present and set about to create an affordable All-In-One fully CNC machined Tungsten Grinder that would offer more features and performance then any Grinder on the market, regardless of price and the GEN4™ is the end result!
- 4 Grind Angles all integrated into one unit! 22.5°, 20°, 15° and 10° (45°, 40°, 30°, 20° Included Angle respectively)
- 4 Guide Offsets. By staggering the guides across the face of the wheel, wheel life is increased 4 fold! We've found that with 6 or 8 offsets, wheel life is no longer extended appreciably as the grind paths just start to overlap. By reducing the unnecessary number of offsets, we are able to reduce the cost and offer other features that are much more beneficial!
- 4 Brass Tungsten Guides. 040, 1/16, 3/32 & 1/8" all Included and recessed deep into the thicker sidewalls so they don't get snagged on your clothing! Our Guides are CNC machined to insure the concentric, on-center and tight tolerance needed to properly support and guide your Tungsten!
- Machined in Tungsten Cut-Off Port. An absolute must for any Tungsten Grinder. Without the ability to Cut-Off your contaminated Tungsten, even the smallest contaminate on the end of your Tungsten can prohibit you from inserting it through the tight tolerance guides.
- Quick-Change Hex Headed Mandrel with hex key. This feature is truly a blessing and hard to appreciate if you've never owned another model with phillips or flat screws that always fall off when you are trying to change them, this makes the process quick and painless, you'll see!
- CNC Precision Machined of indestructible Delrin.
Fits most all rotary tools with a 3/4-12 thread including Black and Decker, Milwaukee, Dremel and More!
Included with your purchase:
- Qty 1 GEN4™ Tungsten Sharpener with 4 Guide Offsets
- Qty 4 Brass Guides 040, 1/16, 3/32 & 1/8"
- Qty 4 Grind Angles: 22.5°, 20°, 15° and 10° (45°, 40°, 30°, 20° Included Angles respectively)
- Qty 1 Mandrel with Hex Screw and Wrench (makes wheel changing a breeze compared to phillips or slotted screws, you'll see!)
- Qty 2 Double sided diamond wheels.
Rotary tool pictured not included.
Zero-Tolerance Industries was founded in 2009 and offers a full service CNC Machine Shop for all your manufacturing needs!
Always wear, eye, respiratory and protective clothing when welding and using your TungstenMate.